OMC Boats Wanted

WANTED: OMC DUAL DELUXE 17 FOOT BOAT -- 6/9/2004

WANTED MID 60'S OMC DUAL DELUXE 17 FOOT BOAT. WILL CONSIDER ANY CONDITION. EMAIL ME AT: I.COCKBURN(at)BELLNET.CA

WANTED: Evinrude Playmate 15ft 7/15/2005

Looking for 15ft. Evinrude Playmate (or Johnson Caprice). Northeastern US. Send info to whippetsrunn(at)verizon.net

WANTED: 1962-1965 Johnson/OMC 17 Deluxe 2/1/2005

WANTED: 1962-1965 OMC or Johnson 17 Deluxe. Located on the West Coast as far as BC or south as SD. Will consider most boats. Would prefer a complete run vessel though. I am located in Fresno, CA mid way between LA and SF. e-mail No1brncMan(at)AOL.COM

WANTED: 17ft Deluxe, or 64-66 Evinrude Playmate, Sweet '16, Rogue 7/1/2005

WANTED: a 62 - 65 17ft OMC Johnson Deluxe motorboat or 64 - 66 Evinrude Sweet 16, Rogue or Playmate. I am on the West coast, so as close to Vancouver BC as possible. I will do any restoration necessary but no wrecks please. Thanks! Please Email James at chaindrive(at)telus.net.

WANTED: Early 60's OMC Deluxe or Seasport for parts. 7/22/2005

WANTED: Early 60's OMC Deluxe or Seasport for parts. Seats/frames, convertible top/frame, hardtop, engine covers, dash, gauges, chrome parts... Please call Philip at 215-570-2347 or email emailphilcohen(at)yahoo.com

WANTED: Johnson 17' parts 10/20/2005

1964 Johnson 17' I/O 150HP Tri-Hull Runabout
Model: 121301E (Bimini Blue)
Serial: I-3617

WANTED: NOS or Used Parts. I'm trying to restore/replace hull parts on my boat: tilt windshield rubber parts, dash panel, gauges, chrome, etc. The V6 Buick engine and Outdrive are in great shape. Over the years I've been able to find outdrive parts by searching from the East Coast to the West Coast

I have parts numbers and descriptions for MISCELLANEOUS GROUP, LIGHT GROUP, WINDSHIELD & LIGHT MECHANISM, STORAGE BINS & TRAYS, STEERING GROUP, ENGINE COVER & BASE PLATE GROUP, FUEL SYSTEM GROUP, and SPEEOMETER ASSEMBLY; I'm looking for some of the parts within those groups. Years ago I purchased a parts catalog from OMC for the 1964 Custom and Deluxe Boats. Most parts are interchangable for the models. The Custom had an 88HP engine. I purchased the boat in 1976 in Port Clinton, OH, Lake Erie; it's never been in salt. I've only seen 2 others in 29 years. Parts needed are too numerous to list here, but if anyone has parts, I can get the information to you including shematics with part number references and part location.

Any information that can provided for a parts source would be very much appreciated. The ole' boat purrs like a kitten turning heads and receives great comments from all who see her on the lake. The "instant aircontitioning" (tilt windshield) leaves them in awe. I've taken care of the engine and outdrive all these years and it's time to try to dress up the hull. Thank you.

Contact: Dave
E-mail: ddetrick(at)carolina.rr.com
Phone: 704-474-5937
Location: Norwood, NC (Lake Tillery)

1960s Johnson / OMC Deluxe 1/10/2006

Looking for 1960s Johnson / OMC Deluxe, any condition. Also looking for parts for these boats. Such as, lights, lenses, hulls, convertible tops, engines, and stern drives in working or non working condition. I am also interested in boat, engine, and stern drive technical manuals for these boats. If you know the location of any of these boats that may be for sale, please let me know. Thank you I live in South Carolina, and am willing to travel just about anywhere in the Eastern United States, perhaps to Southern Canada for a boat that is in near perfect condition.

Shawn Stowell
864-439-6884 (If no answer, please leave message and phone number, I'll return your call)
b_52(at)netzero.com

WANTED: Sweet 16 Seats/Frames. 6/13/2006

WANTED: 64' - 65' Sweet 16 or Sports 16 parts. Looking for at least 2 sets of Seats/frames with mounting hardware, Please email gigantor_33(at)hotmail.com

WANTED: 1964 Johnson 17 Deluxe Parts 6/15/2006

Three (3) rear seat frames, with or with out cushions.
Bimini top frame & mounts. With or with out canvas.

Kevin J. Beliveau
kjbeliveau(at)gtplastics.com

WANTED: 1964-1966 Johnson 17 Dual Deluxe or Deluxe w/ V-4 9/9/2006

Would like to buy a 1964 thru 1966 Johnson 17' Dual Deluxe boat or would settle for a 17' Deluxe. Would like it to have the V-4 inboard engines. I would like this in a restorable condition. Does not have to run. I live in Southeastern Oklahoma. Any location considered, but would prefer it to be in the Central part of the US.

Rodney Stevenson
rod102(at)pine-net.com

WANTED: Parts 10/31/2006

Wanted -- Metal Fuel Cap, Molded Cushion (web-style) Seats or Frame hardware, Convertible Top hardware for 65 - 67 Evinrude/Johnson boats, emblems or logos.

Lee Shuster
801.585.5552
lee.shuster(at)utah.edu

Wanted OMC Deluxe 17 11/14/2006

Looking for an excellent condition OMC Deluxe 17'. Prefer a dual or 150 hp engine, but will consider all Deluxe models up through 64. Email jackrisley(at)mac.com or call 804-263-2461.

WANTED: Johnson Surfer, 200 HP 11/29/2006

Johnson Surfer Tri-hull, 200 HP, late 60's vintage. Any condition.

Email: EWINGJEFE(at)aol.com

WANTED: 1967 19' Johnson Surfer, 200 HP 11/29/2006

Hello from Germany! I'm urgently look for a 1967 19' Johnson Surfer (200 HP) in condition 2 - 3. It' s great runaboat. I got one by myself, and now I need a second one. I will pay a good price!!!

Contact: Mario Kurenbach
Email: MarioKurenbach(at)aol.com

WANTED: Dual Deluxe 12/21/2006

I would very much like to find a dual engine OMC type boat (Dual Deluxe, or or a boat with two DU sterndrives) to add to my collection, I would pay a fair price. Thanks for your consideration.

Contact: Doug Ault; home: 763-658-4772, cell: 612-240-8675, work: 762-972-2129
Email: dault(at)aol.frontiernet.net.

WANTED: V4 STERN DRIVE 3/16/2007

Wanted: V4 Stern Drive for 1964 Sweet 16.

Contact: Brian80012(at)aol.aol.com

WANTED: PARTS FOR 1969 210 ROGUE 6/20/2007

Searching for a good aluminum rub rail for 19 ft 210 Rogue and any other parts that may be available. Also mooring cover and rear enclosure.

Contact: info(at)aol.richlimos.net

WANTED: PARTS FOR 1969 210 ROGUE 8/8/2008

I'm looking for glove box door and hardware for a 1969 rouge 210. And original canvas in any shape. Any help would be appreciated. This boat is in very nice shape, just missing some things. I'll post some pictures soon.

Contact: repairross(at)aol.com

WANTED: windshield for a Canadian built 1964 evinrude 8/8/2008

I am Looking for a (curved plexiglass) windshield for a Canadian built 1964 evinrude gullwing.

Snow slid off the roof a couple years ago and took out the windshield and this boat has been too good a boat to get rid of. Was orig I/O and have converted to Outboard... After 28 years of abuse i am going to restore it...so i would be intrested in whatever you might have in the way of parts or whole boat if price is right...

Bob
Tiverton Ontario Canada

Contact: tivertonauto(at)bmts.com

WANTED: 1966, 1967 or 1968 Johnson Caprice 9/28/2008

Wanted 1966, 1967 or 1968 Johnson Caprice 14'9" long boat with the V-4 90hp DU series two stroke engine and stern drive, any condition. Live in the Detroit, Michigan area will travel to acquire the boat. Please E-mail me with details or any leads to where I can find one of these boats at loweski(at)comcast.net

Thank You,
Bill

WANTED: 1968 Sportsman 155 Bow Fuel Tank 5/17/2009

I'm looking for an original bow mounted tank for my '68 Sportman Model number 221605S. Any help is appreciated.

Thank you

Boat Name: Sportsman 155 I/O
Make: Evinrude
Model: 16' Sportsman
Year: 1968
Engine: V-6 155HP
Contact: 248-636-3281
Location: Pontiac, Mi
Model number: 221605S
Hull serial number: 28550

WANTED: EVINRUDE ROUGE in good condition 5/28/2009

Make: Evinrude
Model: 19' Rogue
Contact: aj3289(at)comcast.net
Location: Northeast

WANTED: 17' OMC deluxe 64 to 66 in good to excellent shape 6/3/2009


Contact: Dave Allen 704 807 3105

Found an old sportsman 155 & need info! 6/16/2009

My buddy and I are both veterans returned from Iraq and we found a Evinrude Sportsman 155 on it's side in a field. We asked the landowners if we could have a shot at fixing her up and they agreed. We now need to figure out how best to do this and would welcome any suggestions and/or advice.

Make: Evinrude
Model: 16' Sportsman
Engine: V-6
Contact: michaelplimmer(at)yahoo.com
Location: Austin
Model number: 224506
Hull serial number: WI-29959

Wanted seats, frames and hardware for a 1965 Evinrude Sport 16 6/30/2009

We were driving past a gas station one day and the previous owner of the boat was putting gas in it. My husband turned around to go look at the boat. As it turned out the man was wanting to sell the boat. We ask him to give us a call when he decided how much he wanted for it. A few days later we were the proud owners of the boat. We really want to take it back to its original state and want to start with the seats. We have two seats but would like to have the others. We would like to find blue but any color will work.

Make: Evinrude
Model: 16' Sport '16
Year: 1965
Engine: Outboard
Contact: Dianne at mcclearydianne4(at)gmail.com or 417-543-0082
Location: Ava, Mo
Model number: 204502A
Hull serial number: W-O-12473

Gas tank for 1967 Evinrude Sportsman 7/23/2009

We have a nice 1967 and would like to find a gas tank in good shape. The gas tank mounts in the front.

Make: Evinrude
Model: 16' Sportsman
Year: 1967
Engine: I-4 120HP
Contact: mcclearydianne4(at)gmail.com
Location: Ava MO
Model number: 234504E
Hull serial number: W1-21556

Windshield Wanted 8/18/2009

I am looking for a windshield for my 1971 Chris Craft Gull Wing Dolphin 19. I understand that there were multiple boats (models) with the same windshield. If you are parting out a boat with the same windshield, I am very interested.

Thanks,

-Marc

p.s.- Also like to get a new bimi top.

Make: Chris-Craft
Model: 19' Dolphin
Year: 1971
Engine: V-8 200HP
Contact: marcustanger(at)yahoo.com
Location: San Jose, Ca

WANTED: PARTS FOR 1969 210 ROGUE 8/18/2009

Original canvas in any shape and engine cover. Any help would be appreciated.
Regards

Joergen Hansen

Make: Evinrude
Model: 19' Rogue II
Year: 1969
Engine: V-8 210HP
Contact: jha(at)dadlnet.dk

Gauge Cluster / Dash Board for a early 60s OMC Deluxe 17' 8/27/2009

Make: OMC
Model: 17' Deluxe
Year: 1962
Engine: V-4 88HP
Contact: lewiska(at)juno.com
Location: San Jacinto, California

Parts for 1968 Evinrude Sportsman 155 10/15/2009

We just purchased this Boat in Hackensack, Mn and brought back to Lynchburg, Va and we are trying to get a few needed parts. We need the Anchor/Bow Light Lens (Part # 901872) and the starboard side Windshield glass (Part # 904990) to bring this back to its original shape. Any help would be GREAT!!!

Make: Evinrude
Model: 16' Sportsman
Year: 1968
Engine: V-6 155HP
Contact: cbreen5510(at)verizon.net
Location: Lynchburg, Va
Model number: 221605S
Hull serial number: WI-28717

WANTED: Evinrude Frontrunner 3/16/2010

Hi, My restored Frontrunner has been destroyed in a fire, would very much like to replace it, does anyone have or know where I could purchase another? Almost any condition. Thanks The Pic is NOT of my boat, Just to get your attention, Nice boat tho..

Cal

Make: Evinrude
Model: 16' Frontrunner
Year: 1970
Engine: V-6
Location: Minneapolis
Contact: Cal(at)Q.com

(click on photo to enlarge)
 

WANTED: 1966 or 1967 Johnson Caprice 10/22/2009

I am looking for a nice 1966 or 1967 red Johnson Caprice to purchase.

Contact: Fickeorthodontics(at)hotmail.com

WANTED: 3 Original Evinrude/Johnson boat Cleats 1/14/2010

Make: OMC
Contact: evinrude115(at)hotmail.com
Location: Clinton, Tennessee

WANTED: 1964-1967 Sportsman, Sport '16 wiper motor parts 3/6/2010

I have a 1964 Sport '16 with a V-4 two stroke engine and I have a 1966 Sportsman 16 with a I-4 engine. My plan is to take out the V-4 engine since is blown and I don't like two stroke engines and drop in the straight 4 engine. I got all the parts just would like to find a windshield wiper arm and motor. If anyone would like any parts off the 1966 let me know. I got a spare orginal trailer, two V-4 88 HP engines, got two sets of gauges not sure all of what im keeping off the one but shoot me a message if you would want anything.

Scott

Boat Name: Sunshine
Make: Evinrude
Model: 16' Sport '16
Year: 1964
Engine: V-4 88HP
Contact: Scottr1110(at)aol.com
Location: Westmont, IL

can have the engine cover and guages
parts boat

WANTED: OMC Dual Deluxe 3/20/2010

I'm embarking on a quest to find a Dual Deluxe. I know...but if you don't start somewhere you'll never get anywhere. Any condition - anywhere. $100 reward for information leading to my acquiring one.

Thanks!
Peter
in Denver

Make: OMC
Model: 17' Dual Deluxe
Contact: Finboats(at)Gmail.Com
Location: Denver

 

WANTED 1964-1966 OMC JOHNSON DELUXE 3/21/2010

Looking for an excellent condition or restored OMC or Johnson deluxe 64-66

Make: Johnson
Model: 17' Deluxe
Year: 1965
Engine: V-6 155HP
Contact: Dave Allen 704 807 3105; robeetus(at)carolina.rr.com

Windshield Wanted for 1971 Chris Craft Dolphin 19! 3/22/2010

Hi there,

I am interested in finding a windshield for my 1971 Chris Craft Dolphin 19, It's the same as the Evinrude model. Any leads are appreciated...

Thanks,

-Marc

Make: Chris-Craft
Model: 19' Dolphin
Year: 1971
Engine: V-8 210HP
Contact: marcustanger(at)yahoo.com
Location: San Jose, Ca.

Want to buy- 68 Johnson Reveler ORIGINAL Convertible top 4/4/2010

Just picked up this mint condition Reveler, but the top is either aftermarket or just a different model than the one i want. The one I'm interested in is shown in the original parts catalog

Make: Johnson
Model: 16' Reveler
Year: 1968
Engine: V-6 155HP
Contact: ghalsne(at)gmail.com
Location: Seattle, Wa

(click on photos to enlarge)
 

Need transom trim pieces for Sport 14 4/12/2010

Just found this old hull abandoned at a marina..... I want to get it back in great shape......... Any help or info would be greatly appreciated.

Make: Evinrude
Model: 14' Sport '14
Year: 1965
Engine: Outboard
Contact: Glenn Levine 209 649 9567 or GRLandJAL(at)aol.com
Location: Tracy, California ... Moses Lake, Washington
Model number: 303602L
Hull serial number: WO 11251

1968 Johnson Sea Sport II Top 6/17/2010

I am looking for an original OEM top for my 1968 Johnson Sea Sport II. Any help will be greatly appreciated! Thanks!!!

Make: Johnson
Model: 16' SeaSport (II)
Year: 1968
Engine: V-6 155HP
Contact: j_mcdavid_20(at)yahoo.com

Like this one...

1968 Johnson Surfer Engine Cover Wanted 6/29/2010

Make: Johnson
Model: 19' Surfer
Year: 1968
Engine: V-6
Contact: wmorton(at)ddcon.com

Back to gull-wing.net